Press "Enter" to skip to content

New Hold-A-Rotor slips on and locks disc brake rotors in place

Kit is designed to secure disc brake rotors in place during repairs for more than 90 percent of domestic and European vehicles

Dayton, Ohio—Steck Manufacturing has introduced its new Hold-a-Rotor Tool Kit. The Hold-a-Rotor is designed to secure automotive and light truck disc brake rotors in place during repairs.

Because these professional-grade plugs are design to fit the most common 12-millimeter (green) and 14-millimeter (red) wheel mounting studs, the Hold-a Rotor works on more than 90 percent of domestic and European vehicles.

These tools help speed up technician repair times during brake pad, wheel bearing jobs, and other wheel and brake repairs that require the removal of the rotor. The plugs are made in the USA and easily store in a drawer, with each size quickly identified by its unique color. 

“Capped or chromed encapsulated hex nuts can’t hold the rotor in place without the wheel. So, techs must search around for a spare hex nut with the correct diameter and thread pitch, said Milton Specialty Tool Group General Manager Jeffrey Del Rossa.

“The Hold-a-Rotor quickly and easily slips on and off one-handed, securing the rotor to the hub face. It keeps the rotor in its installation position, preventing it from wobbling and causing difficulty fitting brake pads and calipers, reducing repair times.”

Comments are closed.

Bringing you regional and national automotive aftermarket news
Verified by MonsterInsights